Boost Module DC DC Power Supply 600W Constant Current Constant Voltage 9 - 60 V To 12 - 80V

600W boost module power supply DC-DC constant current constant voltage 9-60V to 12-80V 48V 72V

Module parameters:

name: 600W boost constant current module

properties: non isolated boost module (BOOST)

Input voltage: two input voltage ranges are optional, (select jumpers on board).

1, 8-16V input (for three series lithium battery and 12V battery application) in this input state, please do not overload the input, otherwise it will burn the module!!!

2, 12-60V input factory default range (for wide input voltage range)

Input current: 16A (MAX) over 10A, please strengthen heat dissipation.

Quiescent working current: 15mA (12V rise 20V, the output voltage will increase as Gao Jing current increases).

Output voltage: 12-80V continuous adjustable (default output 19V, if other voltage, please explain to the

shopkeeper. ) 12-80V fixed output (for Pi customers)

Output current: 12A MAX over 10A, please strengthen heat dissipation (related to input and output differential pressure, the larger the differential pressure, the smaller the output current).

Constant current range: 0.1-12A

Output power: = input voltage *10A, such as: input 12V*10A=120W, input 24V*10A=240W, input 36V*10A=360W, input 48V*10A=480W,

Input 60V*10A=600W

If more power is needed, two modules can be used in parallel, for example, the output is 15A, which can be connected in parallel with two modules, and the current of each module can be adjusted to 8A.

Working temperature: -40~+85 degrees (please strengthen heat dissipation when ambient temperature is too high).

Working frequency: 150KHz

Conversion efficiency: 95% higher. Efficiency is related to input, output voltage, current and differential pressure.

Overcurrent protection: (input over 17A, automatically reduce output voltage, with a certain range of error).

Short circuit protection: it has (input 20A fuse) double short circuit protection, it is safer to use.

Input reverse connection protection: No, if necessary, please input diode in input.

Output anti backfill: Yes, there is no need to add anti reverse diode when charging.

Installation way: 2 3mm screws

Connection mode: no welding output of terminal

Module size: long 75mm wide 60mm high 55mm

Application scope:

1, DIY a regulated power supply, input 12V can be, output can be 12-80V adjustable.

2, power supply for your electronic device, and you can set the output value according to your system voltage.

3, as a vehicle power supply, for your laptop, PDA or all kinds of digital products powered.

4, DIY a high-powered notebook mobile power supply: a lithium battery pack with large capacity 12V, allowing your books to go wherever they go.

5, solar panel voltage stabilizer.

6. Charging the battery, lithium battery and so on.

7, drive high power LED lamp.